High Carbon Steel Wire Drawing Machine，LT-350 WET WIRE DRAWING MACHINE
Raw material
High and middle carbon steel ( 45#; 60#; 70#; 80# )
High Carbon Steel Wire Drawing Machine，LT-350 wet wire drawing machine
I- The main technical specification.
| Name | Type and specification |
| Equipment | Payoff stand + LT(1+17)/350-4T wet drawing M/C+GS400 spooling take up M/C; Shaft of cone(4pcs) + traction wheel shaft(1pc) + spooling takup M/C; horizontal collocation. |
| Raw material | High and middle carbon steel ( 45#; 60#; 70#; 80# ) |
| Inlet diameter | 2.5mm—2.2mm—1.8mm ( 1100Mpa) – phosphorated wire. |
| Final products diameter | 0.8mm—0.5mm—0.4mm (2200 Mpa) |
| Passive payoff stand | Rod specification: outer Φ 800*inner Φ 460hight 1600mm plum brossom type rod. The payoff has broken-wire protection funtion, the speedcan meet with drawing machine. |
| Die arrangement | To be equiped one set of die per machine ( 1 set = 18 pieces ) |
| Speed/ direction | 600m/ min ( 10m/s 60HZ ) left >>>> right |
| Total compression ratio | 94.8% |
| Average compression ratio | 15.2% |
| Cone collocation | 8 trough/ 8 trough + 8 trough/ 8 trough |
| Cone/ traction whill | Body is 45# forged steel. Coated by WC, coaxio degrees ≤ 0.025 can use for 22000 hours |
| Motor | The motor of drawing M/C is Y2VP-45KW-4P electric motor with invertor.
The traverse motor is Y2VP-0.55KW-4P electric motor with invertor. The Takeup motor is Y2VP-7.5KW-4P electric motor with invertor. |
| Driven | Imported synchronnization belt and narrow “V” type belt is adopted by main machine, itcan redue the noise, the noise is nor more than 80Db.
The motor with inverter are adopted by main machine and take up machine and these motors are fixed on one steel plate. Thay can reduce the shock when the motor started. The main transmission parts should be balanced, |
| Cooling for drawing machine | The die of out M/C, 1# dry-drawing die is adopted cycle water cooling
The die of inner M/C are adopted by all-immersing type and oil-injection type. When the machine is working, the die will be immersed in lubrication and when the wire goes in to the die, the oil-injiection type is adopted. The die size: Φ 28*15 |
| Cooling for cone-shaped wheel and traction wheel | Cooling for cone-shaped wheel is adopted by immersing type. The traction wheel cooling is adopted by cycle water cooling |
| Lubricant | The pressure source of lubrication and cooling is from out of M/C and provided together.
The lubricant and cooling water is circular used which is out of M/C. |
| Die arrangement | Out of drawing M/C: inlet 1# dry-drawing die.
Inner drawing M/C: NO.02#_09#: the first line die holder NO.10#_17#: the second line die holder NO.18# die: X-Y moving, the die can be adjusted. |
| Dancer wheel | Fixed-wheel group ( 04 pcs), dancer-wheel group (03 pcs). |
| Take-up | 400 spooling take up machine , loading and un loading is controlled by pneumatic. |
| Spool size | 400mm spooling weight: 45kg/spool |
| Traverse | The screw traverse is adopted by traverse, controlled by knob |
| Straightener | 14-wheels straightener is adopted. |
| Size and weight | Length 6500mm x width 1500mm x height 2000mm
Weight: 5000kg/set |