Vertical Drop Coiler/Vertical Wire Drop Machine This equipment is equipped with the take-up part at the back of the wire drawing machine. The pulled out wire head is guided to the tension guide wheel, and then wound to the upper drum for 2 to 4 times (according to the pulling force required), and then passed…
Raw material High and middle carbon steel ( 45#; 60#; 70#; 80# ) Inlet diameter 2.5mm—2.2mm—1.8mm ( 1100Mpa) – phosphorated wire. Final products diameter 0.8mm—0.5mm—0.4mm (2200 Mpa) Imported synchronnization belt and narrow “V” type belt is adopted by main machine, itcan redue the noise, the noise is nor more than 80Db.The motor with inverter are…
•It is used to drawing and annealing copper rod. In addition, it is applied to making electric wire. Our company will provide a series of production equipment to meet our customers’ need, concluding drawing machine, rigid frame stranding machine and extruder. Wet type drawing machines are best suited for breaking down copper and aluminium wires,…
Rewinding Line This semi-automatic rewinding line consists of a powered pay-off, automatic tension control dancer unit and spooling machine. Key Features: Technical Data:Line Configuration Pay-off – Dancer – Winder 1000 Wire range: Ø1,6 – 5,0 mm Wire speed: Up to 15 m/s Type of Spools: Coils, wire baskets, plastic and fibre Spool flange: 415 –…
Statablock Coiler Vertical Statablock Coilers are available in both horizontal and vertical pattern. The former design has its block on a horizontal axis and is normally used in high speed applications while the latter one has its block on a vertical axis and is normally used in lower speed applications. The Statablock Coiler Vertical is…
De-Spooling Machine Horizontal The De-Spooling Machine Horizontal is available in different sizes dependent on your individual production requirements. Key features: